(kicad_pcb
	(version 20241229)
	(generator "pcbnew")
	(generator_version "9.0")
	(general
		(thickness 1.6)
		(legacy_teardrops no)
	)
	(paper "A4")
	(layers
		(0 "F.Cu" signal)
		(2 "B.Cu" signal)
		(9 "F.Adhes" user "F.Adhesive")
		(11 "B.Adhes" user "B.Adhesive")
		(13 "F.Paste" user)
		(15 "B.Paste" user)
		(5 "F.SilkS" user "F.Silkscreen")
		(7 "B.SilkS" user "B.Silkscreen")
		(1 "F.Mask" user)
		(3 "B.Mask" user)
		(17 "Dwgs.User" user "User.Drawings")
		(19 "Cmts.User" user "User.Comments")
		(21 "Eco1.User" user "User.Eco1")
		(23 "Eco2.User" user "User.Eco2")
		(25 "Edge.Cuts" user)
		(27 "Margin" user)
		(31 "F.CrtYd" user "F.Courtyard")
		(29 "B.CrtYd" user "B.Courtyard")
		(35 "F.Fab" user)
		(33 "B.Fab" user)
	)
	(setup
		(pad_to_mask_clearance 0)
		(allow_soldermask_bridges_in_footprints no)
		(tenting front back)
		(aux_axis_origin 100 100)
		(grid_origin 100 100)
		(pcbplotparams
			(layerselection 0x00000000_00000000_00000000_020000a5)
			(plot_on_all_layers_selection 0x00000000_00000000_00000000_00000000)
			(disableapertmacros no)
			(usegerberextensions no)
			(usegerberattributes yes)
			(usegerberadvancedattributes yes)
			(creategerberjobfile yes)
			(dashed_line_dash_ratio 12.000000)
			(dashed_line_gap_ratio 3.000000)
			(svgprecision 6)
			(plotframeref no)
			(mode 1)
			(useauxorigin no)
			(hpglpennumber 1)
			(hpglpenspeed 20)
			(hpglpendiameter 15.000000)
			(pdf_front_fp_property_popups yes)
			(pdf_back_fp_property_popups yes)
			(pdf_metadata yes)
			(pdf_single_document no)
			(dxfpolygonmode yes)
			(dxfimperialunits yes)
			(dxfusepcbnewfont yes)
			(psnegative no)
			(psa4output no)
			(plot_black_and_white yes)
			(plotinvisibletext no)
			(sketchpadsonfab no)
			(plotpadnumbers no)
			(hidednponfab no)
			(sketchdnponfab yes)
			(crossoutdnponfab yes)
			(subtractmaskfromsilk no)
			(outputformat 4)
			(mirror no)
			(drillshape 0)
			(scaleselection 1)
			(outputdirectory "")
		)
	)
	(net 0 "")
	(net 1 "/SPI1.D0")
	(net 2 "/MMC1.DAT6")
	(net 3 "/MMC1.DAT7")
	(net 4 "/MMC1.DAT2")
	(net 5 "/MMC1.DAT3")
	(net 6 "/GPIO66")
	(net 7 "/GPIO67")
	(net 8 "/GPIO69")
	(net 9 "/GPIO68")
	(net 10 "/GPIO45")
	(net 11 "/GPIO44")
	(net 12 "/GPIO23")
	(net 13 "/GPIO26")
	(net 14 "/GPIO47")
	(net 15 "/GPIO46")
	(net 16 "/GPIO27")
	(net 17 "/LCD.AC_BIAS_E")
	(net 18 "/LCD.HSYNC")
	(net 19 "/GPIO65")
	(net 20 "/LCD.VSYNC")
	(net 21 "/LCD.PCLK")
	(net 22 "/GPIO22")
	(net 23 "/MMC1.DAT5")
	(net 24 "/MMC1.DAT4")
	(net 25 "/MMC1.DAT1")
	(net 26 "/MMC1.CLK")
	(net 27 "/MMC1.CMD")
	(net 28 "/MMC1.DAT0")
	(net 29 "/GPIO61")
	(net 30 "/LCD.DATA14")
	(net 31 "/LCD.DATA15")
	(net 32 "/LCD.DATA13")
	(net 33 "/LCD.DATA11")
	(net 34 "/LCD.DATA8")
	(net 35 "/LCD.DATA10")
	(net 36 "/LCD.DATA6")
	(net 37 "/LCD.DATA9")
	(net 38 "/LCD.DATA4")
	(net 39 "/LCD.DATA7")
	(net 40 "/LCD.DATA2")
	(net 41 "/LCD.DATA5")
	(net 42 "/LCD.DATA0")
	(net 43 "/LCD.DATA3")
	(net 44 "/LCD.DATA1")
	(net 45 "/GPIO30")
	(net 46 "/GPIO60")
	(net 47 "/GPIO31")
	(net 48 "/I2C2.SDA")
	(net 49 "/I2C2.SCL")
	(net 50 "GNDD")
	(net 51 "+3V3")
	(net 52 "+5V")
	(net 53 "/GPIO40")
	(net 54 "/GPIO48")
	(net 55 "/AIN1")
	(net 56 "/AIN0")
	(net 57 "/AIN3")
	(net 58 "/AIN2")
	(net 59 "/AIN5")
	(net 60 "/AIN6")
	(net 61 "GNDA")
	(net 62 "/AIN4")
	(net 63 "+1V8")
	(net 64 "/GPIO51")
	(net 65 "/GPIO4")
	(net 66 "/GPIO5")
	(net 67 "/GPIO3")
	(net 68 "/GPIO2")
	(net 69 "/GPIO49")
	(net 70 "/GPIO15")
	(net 71 "/GPIO117")
	(net 72 "/GPIO14")
	(net 73 "/GPIO125")
	(net 74 "/GPIO122")
	(net 75 "/GPIO20")
	(net 76 "/GPIO7")
	(net 77 "/~{SYS_RESET}")
	(net 78 "/PWR_BUT")
	(net 79 "VBUS")
	(net 80 "/SPI1.SCLK")
	(net 81 "/SPI1.CS0")
	(net 82 "/LCD.DATA12")
	(footprint "Connector_PinHeader_2.54mm:PinHeader_2x23_P2.54mm_Vertical"
		(locked yes)
		(layer "F.Cu")
		(uuid "00000000-0000-0000-0000-000055df7717")
		(at 119.685 49.835 90)
		(descr "Through hole straight pin header, 2x23, 2.54mm pitch, double rows")
		(tags "Through hole pin header THT 2x23 2.54mm double row")
		(property "Reference" "P8"
			(at 1.27 -2.33 270)
			(layer "F.SilkS")
			(uuid "32c9cf0f-2a65-492a-a967-6a3a5befef0c")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "BeagleBone_Black_Header"
			(at 5.715 27.813 0)
			(layer "F.Fab")
			(hide yes)
			(uuid "366225b7-63cb-4129-87df-d484edb5c1e0")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "61fa5d6e-7473-49a7-aaee-2022678a56ca")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" "Generic connector, double row, 02x23, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/)"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "9c81da97-0255-4d4f-9fa2-bcba25329cbc")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property ki_fp_filters "Connector*:*_2x??_*")
		(path "/00000000-0000-0000-0000-000055df7de1")
		(sheetname "/")
		(sheetfile "BeagleBone-Black-Cape.kicad_sch")
		(attr through_hole)
		(fp_line
			(start 3.87 -1.33)
			(end 3.87 57.21)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "4f0a5577-532f-4829-8d56-26896e248ba3")
		)
		(fp_line
			(start 1.27 -1.33)
			(end 3.87 -1.33)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "1d6affda-680f-486c-ad94-7fb1f0ea0322")
		)
		(fp_line
			(start -1.33 -1.33)
			(end 0 -1.33)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "0937abf6-c5e5-449f-8453-7ea88ac4231e")
		)
		(fp_line
			(start -1.33 0)
			(end -1.33 -1.33)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "9c55d59a-3ce7-4b31-bb03-a6d38590971d")
		)
		(fp_line
			(start 1.27 1.27)
			(end 1.27 -1.33)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "96a7ea93-2823-4663-a08c-fb680c559df5")
		)
		(fp_line
			(start -1.33 1.27)
			(end 1.27 1.27)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "9e22b32b-a0b5-4aab-83da-b93c786a1471")
		)
		(fp_line
			(start -1.33 1.27)
			(end -1.33 57.21)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "8b323e3c-be40-48de-ad5c-6804d28ebe9a")
		)
		(fp_line
			(start -1.33 57.21)
			(end 3.87 57.21)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "213c6149-a33f-465a-a953-39a4bb786db3")
		)
		(fp_line
			(start 4.35 -1.8)
			(end -1.8 -1.8)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "d955b79e-d56b-44d6-b630-1be5b9e57828")
		)
		(fp_line
			(start -1.8 -1.8)
			(end -1.8 57.65)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "35d8cc3a-d331-42f5-99fc-3b0e1ba38946")
		)
		(fp_line
			(start 4.35 57.65)
			(end 4.35 -1.8)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "986953cb-c885-49a1-9848-23c28606e213")
		)
		(fp_line
			(start -1.8 57.65)
			(end 4.35 57.65)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "2fea087e-83dc-45a7-a346-70cf04f0488f")
		)
		(fp_line
			(start 3.81 -1.27)
			(end 3.81 57.15)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "f2e742c0-f1fb-4904-911b-bae19f8968f2")
		)
		(fp_line
			(start 0 -1.27)
			(end 3.81 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "edcc116d-afa5-4933-843b-6166fa5507f3")
		)
		(fp_line
			(start -1.27 0)
			(end 0 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "94e8754d-f7f7-41e3-bf5f-3f4eece5e3cc")
		)
		(fp_line
			(start 3.81 57.15)
			(end -1.27 57.15)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "841302d0-fab2-4142-9b7f-5c0c9b2185ad")
		)
		(fp_line
			(start -1.27 57.15)
			(end -1.27 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "bd1c78fd-b18b-4f90-8f40-b2b1cda43c85")
		)
		(fp_text user "${REFERENCE}"
			(at 1.27 27.94 0)
			(layer "F.Fab")
			(uuid "1ee8c1ad-9fac-489c-afa9-c92a3faee079")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" thru_hole rect
			(at 0 0 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 50 "GNDD")
			(pinfunction "Pin_1")
			(pintype "passive")
			(uuid "29b4ee4b-a8c8-40b5-930d-e1c08f31c587")
		)
		(pad "2" thru_hole oval
			(at 2.54 0 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 50 "GNDD")
			(pinfunction "Pin_2")
			(pintype "passive")
			(uuid "9150f6ae-17b8-4488-8825-08f766fb58ce")
		)
		(pad "3" thru_hole oval
			(at 0 2.54 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 2 "/MMC1.DAT6")
			(pinfunction "Pin_3")
			(pintype "passive")
			(uuid "f33e6e22-b2af-482a-9547-92e9b282bdda")
		)
		(pad "4" thru_hole oval
			(at 2.54 2.54 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 3 "/MMC1.DAT7")
			(pinfunction "Pin_4")
			(pintype "passive")
			(uuid "25d8c295-8ba0-4d75-97d9-1059cc6c3416")
		)
		(pad "5" thru_hole oval
			(at 0 5.08 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 4 "/MMC1.DAT2")
			(pinfunction "Pin_5")
			(pintype "passive")
			(uuid "4d5c59f4-fca5-4fe7-8c60-20ad0fad83a4")
		)
		(pad "6" thru_hole oval
			(at 2.54 5.08 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 5 "/MMC1.DAT3")
			(pinfunction "Pin_6")
			(pintype "passive")
			(uuid "1ca3a785-4431-4afa-b77a-e3fafcb0ad93")
		)
		(pad "7" thru_hole oval
			(at 0 7.62 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 6 "/GPIO66")
			(pinfunction "Pin_7")
			(pintype "passive")
			(uuid "9f403233-ebc2-42c2-9212-ab65f8bb9b17")
		)
		(pad "8" thru_hole oval
			(at 2.54 7.62 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 7 "/GPIO67")
			(pinfunction "Pin_8")
			(pintype "passive")
			(uuid "6f879d0d-45d3-4b16-b3ef-2e35a28692c6")
		)
		(pad "9" thru_hole oval
			(at 0 10.16 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 8 "/GPIO69")
			(pinfunction "Pin_9")
			(pintype "passive")
			(uuid "1bca7eea-ba93-49b3-a7aa-c6008eb3e98d")
		)
		(pad "10" thru_hole oval
			(at 2.54 10.16 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 9 "/GPIO68")
			(pinfunction "Pin_10")
			(pintype "passive")
			(uuid "fd0001d3-3a74-49a8-a2f8-52c67493b566")
		)
		(pad "11" thru_hole oval
			(at 0 12.7 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 10 "/GPIO45")
			(pinfunction "Pin_11")
			(pintype "passive")
			(uuid "724cf043-eb58-4ded-b04d-e5329c45e40a")
		)
		(pad "12" thru_hole oval
			(at 2.54 12.7 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 11 "/GPIO44")
			(pinfunction "Pin_12")
			(pintype "passive")
			(uuid "8dfea97b-a43d-4b4a-9464-77e788c869a9")
		)
		(pad "13" thru_hole oval
			(at 0 15.24 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 12 "/GPIO23")
			(pinfunction "Pin_13")
			(pintype "passive")
			(uuid "65e98343-01d1-4a58-8e01-ed1191505067")
		)
		(pad "14" thru_hole oval
			(at 2.54 15.24 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 13 "/GPIO26")
			(pinfunction "Pin_14")
			(pintype "passive")
			(uuid "0453ec9a-212a-4bdb-bb1c-d3c46469a1d3")
		)
		(pad "15" thru_hole oval
			(at 0 17.78 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 14 "/GPIO47")
			(pinfunction "Pin_15")
			(pintype "passive")
			(uuid "33b793df-06e4-46b5-8037-f6efab3f61ee")
		)
		(pad "16" thru_hole oval
			(at 2.54 17.78 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 15 "/GPIO46")
			(pinfunction "Pin_16")
			(pintype "passive")
			(uuid "295c3970-3899-4f48-9629-6986bff33e13")
		)
		(pad "17" thru_hole oval
			(at 0 20.32 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 16 "/GPIO27")
			(pinfunction "Pin_17")
			(pintype "passive")
			(uuid "f9c30c8e-bc61-4973-a98d-7c8b18b69efb")
		)
		(pad "18" thru_hole oval
			(at 2.54 20.32 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 19 "/GPIO65")
			(pinfunction "Pin_18")
			(pintype "passive")
			(uuid "4602d08a-d3df-41b8-bcaa-13b4b368dd7c")
		)
		(pad "19" thru_hole oval
			(at 0 22.86 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 22 "/GPIO22")
			(pinfunction "Pin_19")
			(pintype "passive")
			(uuid "b29ca3fc-0718-49f2-be72-a68084087ae0")
		)
		(pad "20" thru_hole oval
			(at 2.54 22.86 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 27 "/MMC1.CMD")
			(pinfunction "Pin_20")
			(pintype "passive")
			(uuid "b7ba00d0-3091-4a91-b596-ca6c5e231306")
		)
		(pad "21" thru_hole oval
			(at 0 25.4 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 26 "/MMC1.CLK")
			(pinfunction "Pin_21")
			(pintype "passive")
			(uuid "3cf8f1f7-7649-4163-b6d4-351294e8a05e")
		)
		(pad "22" thru_hole oval
			(at 2.54 25.4 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 23 "/MMC1.DAT5")
			(pinfunction "Pin_22")
			(pintype "passive")
			(uuid "658194a4-2cf8-4b5b-a537-44dfc6e69f3a")
		)
		(pad "23" thru_hole oval
			(at 0 27.94 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 24 "/MMC1.DAT4")
			(pinfunction "Pin_23")
			(pintype "passive")
			(uuid "442978e2-fa45-4ba2-b6d5-a62031319f94")
		)
		(pad "24" thru_hole oval
			(at 2.54 27.94 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 25 "/MMC1.DAT1")
			(pinfunction "Pin_24")
			(pintype "passive")
			(uuid "4fcc0ee6-b6ea-42d1-9004-9a193ba42136")
		)
		(pad "25" thru_hole oval
			(at 0 30.48 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 28 "/MMC1.DAT0")
			(pinfunction "Pin_25")
			(pintype "passive")
			(uuid "f91207bd-e08c-4c17-b9be-2b481d7a95f4")
		)
		(pad "26" thru_hole oval
			(at 2.54 30.48 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 21 "/LCD.PCLK")
			(pinfunction "Pin_26")
			(pintype "passive")
			(uuid "c877da5a-c2d7-4f6d-a1e9-e9c34a699890")
		)
		(pad "27" thru_hole oval
			(at 0 33.02 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 20 "/LCD.VSYNC")
			(pinfunction "Pin_27")
			(pintype "passive")
			(uuid "3b146a8f-31e7-4f88-be08-113042014ee3")
		)
		(pad "28" thru_hole oval
			(at 2.54 33.02 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 29 "/GPIO61")
			(pinfunction "Pin_28")
			(pintype "passive")
			(uuid "54042933-cf00-49a7-8a5c-3f097cab6223")
		)
		(pad "29" thru_hole oval
			(at 0 35.56 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 18 "/LCD.HSYNC")
			(pinfunction "Pin_29")
			(pintype "passive")
			(uuid "8ca20e3d-513e-4d24-928f-bbee312ff7b7")
		)
		(pad "30" thru_hole oval
			(at 2.54 35.56 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 17 "/LCD.AC_BIAS_E")
			(pinfunction "Pin_30")
			(pintype "passive")
			(uuid "09dae391-e0d8-4505-bc81-65c1294e5bd3")
		)
		(pad "31" thru_hole oval
			(at 0 38.1 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 30 "/LCD.DATA14")
			(pinfunction "Pin_31")
			(pintype "passive")
			(uuid "f6ff7740-d23f-4bfe-be69-b1bdaa6e51be")
		)
		(pad "32" thru_hole oval
			(at 2.54 38.1 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 31 "/LCD.DATA15")
			(pinfunction "Pin_32")
			(pintype "passive")
			(uuid "78e08f8f-ac9a-4ef0-8bae-a9abb41bc70f")
		)
		(pad "33" thru_hole oval
			(at 0 40.64 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 32 "/LCD.DATA13")
			(pinfunction "Pin_33")
			(pintype "passive")
			(uuid "ac440427-78db-4f42-9b67-f0d455936ed0")
		)
		(pad "34" thru_hole oval
			(at 2.54 40.64 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 33 "/LCD.DATA11")
			(pinfunction "Pin_34")
			(pintype "passive")
			(uuid "c6c5d9c4-83a8-4bd8-ab35-0f4b7df962dc")
		)
		(pad "35" thru_hole oval
			(at 0 43.18 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 82 "/LCD.DATA12")
			(pinfunction "Pin_35")
			(pintype "passive")
			(uuid "7aac955b-7bd9-4bcb-b517-35db0841f16c")
		)
		(pad "36" thru_hole oval
			(at 2.54 43.18 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 35 "/LCD.DATA10")
			(pinfunction "Pin_36")
			(pintype "passive")
			(uuid "e35ca672-d5d0-46ec-adb3-9e22a725da73")
		)
		(pad "37" thru_hole oval
			(at 0 45.72 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 34 "/LCD.DATA8")
			(pinfunction "Pin_37")
			(pintype "passive")
			(uuid "892146cc-9107-48f5-9847-0a0882c04b57")
		)
		(pad "38" thru_hole oval
			(at 2.54 45.72 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 37 "/LCD.DATA9")
			(pinfunction "Pin_38")
			(pintype "passive")
			(uuid "49505fdd-feee-4f1b-9b9a-a161dd88b986")
		)
		(pad "39" thru_hole oval
			(at 0 48.26 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 36 "/LCD.DATA6")
			(pinfunction "Pin_39")
			(pintype "passive")
			(uuid "533a4aa6-6aab-4dc4-83ff-7f66e9a7af03")
		)
		(pad "40" thru_hole oval
			(at 2.54 48.26 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 39 "/LCD.DATA7")
			(pinfunction "Pin_40")
			(pintype "passive")
			(uuid "5d5aca39-ee45-4406-ad12-fe3342c8e00a")
		)
		(pad "41" thru_hole oval
			(at 0 50.8 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 38 "/LCD.DATA4")
			(pinfunction "Pin_41")
			(pintype "passive")
			(uuid "2f972b89-f7a6-4c80-ab08-b6ba7d80c53f")
		)
		(pad "42" thru_hole oval
			(at 2.54 50.8 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 41 "/LCD.DATA5")
			(pinfunction "Pin_42")
			(pintype "passive")
			(uuid "84906886-9b80-482f-a4c3-498eca4b8078")
		)
		(pad "43" thru_hole oval
			(at 0 53.34 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 40 "/LCD.DATA2")
			(pinfunction "Pin_43")
			(pintype "passive")
			(uuid "d732e0c5-bd2b-4039-aefc-897fc4989ea5")
		)
		(pad "44" thru_hole oval
			(at 2.54 53.34 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 43 "/LCD.DATA3")
			(pinfunction "Pin_44")
			(pintype "passive")
			(uuid "20cbc1fd-448b-40fe-9810-5f2c4ad76503")
		)
		(pad "45" thru_hole oval
			(at 0 55.88 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 42 "/LCD.DATA0")
			(pinfunction "Pin_45")
			(pintype "passive")
			(uuid "d2ef327d-ebaf-4fb7-9c20-963e9f853213")
		)
		(pad "46" thru_hole oval
			(at 2.54 55.88 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 44 "/LCD.DATA1")
			(pinfunction "Pin_46")
			(pintype "passive")
			(uuid "49e8170f-5ed4-4a74-bcc1-53c089bb0054")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_2x23_P2.54mm_Vertical.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "Connector_PinHeader_2.54mm:PinHeader_2x23_P2.54mm_Vertical"
		(locked yes)
		(layer "F.Cu")
		(uuid "00000000-0000-0000-0000-000055df7748")
		(at 119.685 98.095 90)
		(descr "Through hole straight pin header, 2x23, 2.54mm pitch, double rows")
		(tags "Through hole pin header THT 2x23 2.54mm double row")
		(property "Reference" "P9"
			(at 1.27 -2.33 270)
			(layer "F.SilkS")
			(uuid "915df313-3a11-4181-ad7a-d3d733d11352")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "BeagleBone_Black_Header"
			(at -2.905 28.067 0)
			(layer "F.Fab")
			(hide yes)
			(uuid "71e4e2a2-5a1c-4927-9a21-bc38f0ed6d62")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "1f87e478-95bf-45e3-bb91-f9704dfc8edd")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" "Generic connector, double row, 02x23, odd/even pin numbering scheme (row 1 odd numbers, row 2 even numbers), script generated (kicad-library-utils/schlib/autogen/connector/)"
			(at 0 0 90)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "2bf68008-d880-4fe7-8f08-876253216eaf")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property ki_fp_filters "Connector*:*_2x??_*")
		(path "/00000000-0000-0000-0000-000055df7dba")
		(sheetname "/")
		(sheetfile "BeagleBone-Black-Cape.kicad_sch")
		(attr through_hole)
		(fp_line
			(start 3.87 -1.33)
			(end 3.87 57.21)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "0af307ec-f9ce-4342-a3c1-816b5cb41c61")
		)
		(fp_line
			(start 1.27 -1.33)
			(end 3.87 -1.33)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "995efdaa-ab69-4d7b-bcbb-c1a4176e552b")
		)
		(fp_line
			(start -1.33 -1.33)
			(end 0 -1.33)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "18fb81cc-91fe-4902-a5de-6471e83ec165")
		)
		(fp_line
			(start -1.33 0)
			(end -1.33 -1.33)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "2d9de1d0-1f86-4cf9-b582-685c9d472ffe")
		)
		(fp_line
			(start 1.27 1.27)
			(end 1.27 -1.33)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "8fb9d858-af02-48a0-8d38-eebd672fbbf6")
		)
		(fp_line
			(start -1.33 1.27)
			(end 1.27 1.27)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "9ef6afc5-0c07-4c50-a498-44cb84902b87")
		)
		(fp_line
			(start -1.33 1.27)
			(end -1.33 57.21)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "00cb58ad-4df3-4970-8817-dafe1b663a3b")
		)
		(fp_line
			(start -1.33 57.21)
			(end 3.87 57.21)
			(stroke
				(width 0.12)
				(type solid)
			)
			(layer "F.SilkS")
			(uuid "27a37f28-2b89-4449-a2ea-12589ee81390")
		)
		(fp_line
			(start 4.35 -1.8)
			(end -1.8 -1.8)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "721bc137-a3b3-4641-bfca-33ccf2d867f1")
		)
		(fp_line
			(start -1.8 -1.8)
			(end -1.8 57.65)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "dc63327b-6767-45d4-abde-d69e7824b4a6")
		)
		(fp_line
			(start 4.35 57.65)
			(end 4.35 -1.8)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "827d95da-36fc-494d-85c8-14dab3616475")
		)
		(fp_line
			(start -1.8 57.65)
			(end 4.35 57.65)
			(stroke
				(width 0.05)
				(type solid)
			)
			(layer "F.CrtYd")
			(uuid "ee26b269-369b-4584-a024-13d4ca61a501")
		)
		(fp_line
			(start 3.81 -1.27)
			(end 3.81 57.15)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "0c30b11f-6222-4b54-878e-d3588697d3bf")
		)
		(fp_line
			(start 0 -1.27)
			(end 3.81 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "1d37b5f5-2e57-4735-9579-42d9d9cc58ef")
		)
		(fp_line
			(start -1.27 0)
			(end 0 -1.27)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "5d546c12-e7d7-49f2-8726-bfab1b26554d")
		)
		(fp_line
			(start 3.81 57.15)
			(end -1.27 57.15)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "4f8d3bb2-2ab1-4743-a3c9-f3d863872f94")
		)
		(fp_line
			(start -1.27 57.15)
			(end -1.27 0)
			(stroke
				(width 0.1)
				(type solid)
			)
			(layer "F.Fab")
			(uuid "296f08e4-df77-47af-8df9-28cc73416f6c")
		)
		(fp_text user "${REFERENCE}"
			(at 1.27 27.94 0)
			(layer "F.Fab")
			(uuid "e58d917a-2535-4d8b-8ddc-43aa5567ad7e")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "1" thru_hole rect
			(at 0 0 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 50 "GNDD")
			(pinfunction "Pin_1")
			(pintype "passive")
			(uuid "d300cbfd-61f0-41d7-a209-70449ab579c9")
		)
		(pad "2" thru_hole oval
			(at 2.54 0 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 50 "GNDD")
			(pinfunction "Pin_2")
			(pintype "passive")
			(uuid "abeb817a-7a8f-4301-8834-354c3aa01274")
		)
		(pad "3" thru_hole oval
			(at 0 2.54 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 51 "+3V3")
			(pinfunction "Pin_3")
			(pintype "passive")
			(uuid "6638b908-7b88-4e7a-b3c8-d5a4ac9846b3")
		)
		(pad "4" thru_hole oval
			(at 2.54 2.54 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 51 "+3V3")
			(pinfunction "Pin_4")
			(pintype "passive")
			(uuid "e36e7134-59d3-4a72-88e3-2097c78e77b2")
		)
		(pad "5" thru_hole oval
			(at 0 5.08 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 52 "+5V")
			(pinfunction "Pin_5")
			(pintype "passive")
			(uuid "1be0d383-88b4-49b0-ba85-d60208496557")
		)
		(pad "6" thru_hole oval
			(at 2.54 5.08 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 52 "+5V")
			(pinfunction "Pin_6")
			(pintype "passive")
			(uuid "4409db55-8a2f-4a2d-9965-24d00a6ebbb0")
		)
		(pad "7" thru_hole oval
			(at 0 7.62 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 79 "VBUS")
			(pinfunction "Pin_7")
			(pintype "passive")
			(uuid "7390953c-7d90-4d05-8d30-264872cb584f")
		)
		(pad "8" thru_hole oval
			(at 2.54 7.62 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 79 "VBUS")
			(pinfunction "Pin_8")
			(pintype "passive")
			(uuid "b661ef56-5e2b-421a-bc01-03c92f6548ab")
		)
		(pad "9" thru_hole oval
			(at 0 10.16 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 78 "/PWR_BUT")
			(pinfunction "Pin_9")
			(pintype "passive")
			(uuid "580f3e1e-8d27-43b2-9f06-5527b4365513")
		)
		(pad "10" thru_hole oval
			(at 2.54 10.16 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 77 "/~{SYS_RESET}")
			(pinfunction "Pin_10")
			(pintype "passive")
			(uuid "b60108aa-9bd7-49ba-be8e-d1e76ce92c9f")
		)
		(pad "11" thru_hole oval
			(at 0 12.7 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 45 "/GPIO30")
			(pinfunction "Pin_11")
			(pintype "passive")
			(uuid "10e2cf44-0116-4bd6-b193-1f4fe89859c3")
		)
		(pad "12" thru_hole oval
			(at 2.54 12.7 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 46 "/GPIO60")
			(pinfunction "Pin_12")
			(pintype "passive")
			(uuid "db847dd3-b90f-479f-aea5-42ed17c71280")
		)
		(pad "13" thru_hole oval
			(at 0 15.24 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 47 "/GPIO31")
			(pinfunction "Pin_13")
			(pintype "passive")
			(uuid "2fed8eb5-8bdb-46b7-a203-74dc95b6d502")
		)
		(pad "14" thru_hole oval
			(at 2.54 15.24 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 53 "/GPIO40")
			(pinfunction "Pin_14")
			(pintype "passive")
			(uuid "b5fbcf08-9878-401d-a8e0-63486d182509")
		)
		(pad "15" thru_hole oval
			(at 0 17.78 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 54 "/GPIO48")
			(pinfunction "Pin_15")
			(pintype "passive")
			(uuid "d96aab8a-bc47-4a54-9818-1fcc574ab330")
		)
		(pad "16" thru_hole oval
			(at 2.54 17.78 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 64 "/GPIO51")
			(pinfunction "Pin_16")
			(pintype "passive")
			(uuid "0d824e6b-0ec1-4dbc-b532-af7c7fb818c9")
		)
		(pad "17" thru_hole oval
			(at 0 20.32 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 65 "/GPIO4")
			(pinfunction "Pin_17")
			(pintype "passive")
			(uuid "2e9e25ce-758c-438e-9943-83d242dfc24e")
		)
		(pad "18" thru_hole oval
			(at 2.54 20.32 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 66 "/GPIO5")
			(pinfunction "Pin_18")
			(pintype "passive")
			(uuid "1b0be288-4271-4de8-8a50-90670d25f03b")
		)
		(pad "19" thru_hole oval
			(at 0 22.86 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 49 "/I2C2.SCL")
			(pinfunction "Pin_19")
			(pintype "passive")
			(uuid "04fc767b-7235-4142-8561-4d87218d8cb0")
		)
		(pad "20" thru_hole oval
			(at 2.54 22.86 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 48 "/I2C2.SDA")
			(pinfunction "Pin_20")
			(pintype "passive")
			(uuid "fcf277c8-8ea1-47ba-a8e8-a3091444efb8")
		)
		(pad "21" thru_hole oval
			(at 0 25.4 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 67 "/GPIO3")
			(pinfunction "Pin_21")
			(pintype "passive")
			(uuid "20f84ec2-74b7-4845-9f41-e99083cc550e")
		)
		(pad "22" thru_hole oval
			(at 2.54 25.4 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 68 "/GPIO2")
			(pinfunction "Pin_22")
			(pintype "passive")
			(uuid "fc00cf29-e527-42c0-8a35-c03a3e43cc87")
		)
		(pad "23" thru_hole oval
			(at 0 27.94 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 69 "/GPIO49")
			(pinfunction "Pin_23")
			(pintype "passive")
			(uuid "1c24ae68-1dec-4d30-94f5-6d3f26a84d0c")
		)
		(pad "24" thru_hole oval
			(at 2.54 27.94 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 70 "/GPIO15")
			(pinfunction "Pin_24")
			(pintype "passive")
			(uuid "3772c64a-91ba-4133-a315-4fb828ad0bcc")
		)
		(pad "25" thru_hole oval
			(at 0 30.48 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 71 "/GPIO117")
			(pinfunction "Pin_25")
			(pintype "passive")
			(uuid "723355b8-dc98-4c34-a1d6-1492bc8b817a")
		)
		(pad "26" thru_hole oval
			(at 2.54 30.48 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 72 "/GPIO14")
			(pinfunction "Pin_26")
			(pintype "passive")
			(uuid "4f37aef3-f2ec-4181-a2e0-0f6dbef7a6f1")
		)
		(pad "27" thru_hole oval
			(at 0 33.02 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 73 "/GPIO125")
			(pinfunction "Pin_27")
			(pintype "passive")
			(uuid "31cd0bd1-d048-4c03-af5b-0a089e5f53f8")
		)
		(pad "28" thru_hole oval
			(at 2.54 33.02 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 81 "/SPI1.CS0")
			(pinfunction "Pin_28")
			(pintype "passive")
			(uuid "867197d7-8894-4034-a796-6b550c4354ed")
		)
		(pad "29" thru_hole oval
			(at 0 35.56 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 1 "/SPI1.D0")
			(pinfunction "Pin_29")
			(pintype "passive")
			(uuid "56c89583-7936-4217-bd6b-72f693f2c0a9")
		)
		(pad "30" thru_hole oval
			(at 2.54 35.56 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 74 "/GPIO122")
			(pinfunction "Pin_30")
			(pintype "passive")
			(uuid "c635fcbc-06c7-4e8d-a139-6be8179a0ce7")
		)
		(pad "31" thru_hole oval
			(at 0 38.1 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 80 "/SPI1.SCLK")
			(pinfunction "Pin_31")
			(pintype "passive")
			(uuid "3351d87d-e26e-4029-839c-6ff001f253cc")
		)
		(pad "32" thru_hole oval
			(at 2.54 38.1 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 63 "+1V8")
			(pinfunction "Pin_32")
			(pintype "passive")
			(uuid "7980c3b0-5ab2-4e31-b72f-dcfa5c7098bc")
		)
		(pad "33" thru_hole oval
			(at 0 40.64 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 62 "/AIN4")
			(pinfunction "Pin_33")
			(pintype "passive")
			(uuid "eac4ce8b-b8ca-4424-a351-029edb618176")
		)
		(pad "34" thru_hole oval
			(at 2.54 40.64 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 61 "GNDA")
			(pinfunction "Pin_34")
			(pintype "passive")
			(uuid "0a396738-16b7-4a39-b337-f6e7e836edd8")
		)
		(pad "35" thru_hole oval
			(at 0 43.18 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 60 "/AIN6")
			(pinfunction "Pin_35")
			(pintype "passive")
			(uuid "c4859d9e-1588-49da-9793-ae9db0c1abce")
		)
		(pad "36" thru_hole oval
			(at 2.54 43.18 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 59 "/AIN5")
			(pinfunction "Pin_36")
			(pintype "passive")
			(uuid "fe05e0eb-fb8a-4fbd-8979-1e99afe1b05f")
		)
		(pad "37" thru_hole oval
			(at 0 45.72 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 58 "/AIN2")
			(pinfunction "Pin_37")
			(pintype "passive")
			(uuid "5e616cf0-10c3-461a-87fb-26b80777fbde")
		)
		(pad "38" thru_hole oval
			(at 2.54 45.72 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 57 "/AIN3")
			(pinfunction "Pin_38")
			(pintype "passive")
			(uuid "4f019a7f-ac15-4f46-92c1-e204872a80c4")
		)
		(pad "39" thru_hole oval
			(at 0 48.26 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 56 "/AIN0")
			(pinfunction "Pin_39")
			(pintype "passive")
			(uuid "aa7c9ff4-bc3f-4765-9b5f-0db97407d3e1")
		)
		(pad "40" thru_hole oval
			(at 2.54 48.26 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 55 "/AIN1")
			(pinfunction "Pin_40")
			(pintype "passive")
			(uuid "b0f947b6-457e-479e-9331-2fd48fb9f1ec")
		)
		(pad "41" thru_hole oval
			(at 0 50.8 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 75 "/GPIO20")
			(pinfunction "Pin_41")
			(pintype "passive")
			(uuid "2e2b626e-c607-4b2d-89a2-024cef88dc10")
		)
		(pad "42" thru_hole oval
			(at 2.54 50.8 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 76 "/GPIO7")
			(pinfunction "Pin_42")
			(pintype "passive")
			(uuid "f5782ff3-bc7d-4781-a21a-5ad30c28df61")
		)
		(pad "43" thru_hole oval
			(at 0 53.34 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 50 "GNDD")
			(pinfunction "Pin_43")
			(pintype "passive")
			(uuid "f501febb-5947-4b0c-9306-420ca737cbcb")
		)
		(pad "44" thru_hole oval
			(at 2.54 53.34 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 50 "GNDD")
			(pinfunction "Pin_44")
			(pintype "passive")
			(uuid "763e0685-4aff-4c07-abbc-560458269d4e")
		)
		(pad "45" thru_hole oval
			(at 0 55.88 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 50 "GNDD")
			(pinfunction "Pin_45")
			(pintype "passive")
			(uuid "109c640d-428b-4120-872c-029be71adda3")
		)
		(pad "46" thru_hole oval
			(at 2.54 55.88 90)
			(size 1.7 1.7)
			(drill 1)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(remove_unused_layers no)
			(net 50 "GNDD")
			(pinfunction "Pin_46")
			(pintype "passive")
			(uuid "0b4c8067-5f66-4aa0-9b56-3762ff010904")
		)
		(embedded_fonts no)
		(model "${KICAD9_3DMODEL_DIR}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_2x23_P2.54mm_Vertical.wrl"
			(offset
				(xyz 0 0 0)
			)
			(scale
				(xyz 1 1 1)
			)
			(rotate
				(xyz 0 0 0)
			)
		)
	)
	(footprint "MountingHole:MountingHole_3.2mm_M3_DIN965"
		(locked yes)
		(layer "F.Cu")
		(uuid "32b1b148-fa5b-43f5-a7aa-8095e5061784")
		(at 180.645 51.74)
		(descr "Mounting Hole 3.2mm, no annular, M3, DIN965")
		(tags "mounting hole 3.2mm no annular m3 din965")
		(property "Reference" "MH3"
			(at 0 -3.8 0)
			(layer "F.SilkS")
			(hide yes)
			(uuid "84073f17-8c6b-4175-9c04-b1f8c4da7d98")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "MountingHole_3.2mm_M3_DIN965"
			(at 0 3.8 0)
			(layer "F.Fab")
			(hide yes)
			(uuid "b1554d03-bb77-4503-9f39-bc1228746f99")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "8f87282d-0b3c-42d6-80ca-b379e7535981")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "063c4d8a-09a0-4a7c-a4e4-ca86dfe9a33b")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr board_only exclude_from_pos_files exclude_from_bom)
		(fp_circle
			(center 0 0)
			(end 2.8 0)
			(stroke
				(width 0.15)
				(type solid)
			)
			(fill no)
			(layer "Cmts.User")
			(uuid "32230486-4b4e-4894-b65c-d92f4d90919b")
		)
		(fp_circle
			(center 0 0)
			(end 3.05 0)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
			(uuid "67f6a679-458e-4cfd-9f96-aba04cbceec3")
		)
		(fp_text user "${REFERENCE}"
			(at 0.3 0 0)
			(layer "F.Fab")
			(hide yes)
			(uuid "955931e4-055c-42dc-a6b7-5dd54416781f")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 3.2 3.2)
			(drill 3.2)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(uuid "246fa853-1abb-4e95-b423-b53e364183ff")
		)
		(embedded_fonts no)
	)
	(footprint "MountingHole:MountingHole_3.2mm_M3_DIN965"
		(locked yes)
		(layer "F.Cu")
		(uuid "858f0072-00a7-4c87-adfc-55a37919f87e")
		(at 180.645 93.65)
		(descr "Mounting Hole 3.2mm, no annular, M3, DIN965")
		(tags "mounting hole 3.2mm no annular m3 din965")
		(property "Reference" "MH4"
			(at 0 -3.8 0)
			(layer "F.SilkS")
			(hide yes)
			(uuid "c9e87865-780b-4141-946d-8e51265896fc")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "MountingHole_3.2mm_M3_DIN965"
			(at 0 3.8 0)
			(layer "F.Fab")
			(hide yes)
			(uuid "0c76794b-558e-45cc-8d35-a5e77a6074f1")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "5a192a24-4b30-4e3a-adfa-8d1e4ac10b99")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "76737a87-2bf3-4b28-b043-107af6dd48ab")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr board_only exclude_from_pos_files exclude_from_bom)
		(fp_circle
			(center 0 0)
			(end 2.8 0)
			(stroke
				(width 0.15)
				(type solid)
			)
			(fill no)
			(layer "Cmts.User")
			(uuid "781ecc08-3790-403b-b7c6-c7438eaaeeca")
		)
		(fp_circle
			(center 0 0)
			(end 3.05 0)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
			(uuid "15e77a33-9f1c-4c70-97c1-b3ff90bf7f40")
		)
		(fp_text user "${REFERENCE}"
			(at 0.3 0 0)
			(layer "F.Fab")
			(hide yes)
			(uuid "fcde005b-3109-48a1-bd84-267008aa11a4")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 3.2 3.2)
			(drill 3.2)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(uuid "b4561c1e-975d-4e60-9a57-c5a73a944567")
		)
		(embedded_fonts no)
	)
	(footprint "MountingHole:MountingHole_3.2mm_M3_DIN965"
		(locked yes)
		(layer "F.Cu")
		(uuid "a448613f-d312-421a-9eb0-66f4c30d4be7")
		(at 114.605 48.565)
		(descr "Mounting Hole 3.2mm, no annular, M3, DIN965")
		(tags "mounting hole 3.2mm no annular m3 din965")
		(property "Reference" "MH1"
			(at 0 -3.8 0)
			(layer "F.SilkS")
			(hide yes)
			(uuid "3cf95ce5-f927-45f0-8369-58b0f458c4d0")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "MountingHole_3.2mm_M3_DIN965"
			(at 0 3.8 0)
			(layer "F.Fab")
			(hide yes)
			(uuid "9fc90c42-995f-4220-b4f5-12e6d561d855")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "7aa36b45-54af-4fc1-98a9-74cb272646b7")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "fb674afa-343e-469a-ae0e-5548b05d0e4c")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr board_only exclude_from_pos_files exclude_from_bom)
		(fp_circle
			(center 0 0)
			(end 2.8 0)
			(stroke
				(width 0.15)
				(type solid)
			)
			(fill no)
			(layer "Cmts.User")
			(uuid "b90b119f-0e42-4cdd-91c0-b6a1444bc340")
		)
		(fp_circle
			(center 0 0)
			(end 3.05 0)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
			(uuid "1f7aa593-db26-4ba7-8d26-c02d01fa3a66")
		)
		(fp_text user "${REFERENCE}"
			(at 0.3 0 0)
			(layer "F.Fab")
			(hide yes)
			(uuid "34e24469-ad16-4b0f-9843-4555a17b6ad3")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 3.2 3.2)
			(drill 3.2)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(uuid "fd5a58fa-30bd-4b69-8a80-27010f8a2367")
		)
		(embedded_fonts no)
	)
	(footprint "MountingHole:MountingHole_3.2mm_M3_DIN965"
		(locked yes)
		(layer "F.Cu")
		(uuid "d138ffcc-6d50-44da-a05b-0d5ccace3b6b")
		(at 114.605 96.825)
		(descr "Mounting Hole 3.2mm, no annular, M3, DIN965")
		(tags "mounting hole 3.2mm no annular m3 din965")
		(property "Reference" "MH2"
			(at 0 -3.8 0)
			(layer "F.SilkS")
			(hide yes)
			(uuid "36d38ba0-e06b-4b62-8f0d-e2215881d18b")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Value" "MountingHole_3.2mm_M3_DIN965"
			(at 0 3.8 0)
			(layer "F.Fab")
			(hide yes)
			(uuid "48325dca-4fb2-4d5b-bd04-d3a503d4d9af")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(property "Datasheet" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "098dde45-171e-44cd-85d2-b9eb6cc14068")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(property "Description" ""
			(at 0 0 0)
			(unlocked yes)
			(layer "F.Fab")
			(hide yes)
			(uuid "4610e33c-72ec-4862-a717-9a1af38a3cdb")
			(effects
				(font
					(size 1.27 1.27)
					(thickness 0.15)
				)
			)
		)
		(attr board_only exclude_from_pos_files exclude_from_bom)
		(fp_circle
			(center 0 0)
			(end 2.8 0)
			(stroke
				(width 0.15)
				(type solid)
			)
			(fill no)
			(layer "Cmts.User")
			(uuid "eb9f337d-da15-4cd9-93ba-eaeb6e57bea3")
		)
		(fp_circle
			(center 0 0)
			(end 3.05 0)
			(stroke
				(width 0.05)
				(type solid)
			)
			(fill no)
			(layer "F.CrtYd")
			(uuid "f7f0e095-2041-4d7b-ad9b-b0cc01a39eb8")
		)
		(fp_text user "${REFERENCE}"
			(at 0.3 0 0)
			(layer "F.Fab")
			(hide yes)
			(uuid "a4651d6d-d441-4b53-a9da-b7de66cd3bdc")
			(effects
				(font
					(size 1 1)
					(thickness 0.15)
				)
			)
		)
		(pad "" np_thru_hole circle
			(at 0 0)
			(size 3.2 3.2)
			(drill 3.2)
			(layers "*.Cu" "*.Mask" "In1.Cu" "In2.Cu" "In3.Cu" "In4.Cu" "In5.Cu" "In6.Cu"
				"In7.Cu" "In8.Cu" "In9.Cu" "In10.Cu" "In11.Cu" "In12.Cu" "In13.Cu" "In14.Cu"
				"In15.Cu" "In16.Cu" "In17.Cu" "In18.Cu" "In19.Cu" "In20.Cu" "In21.Cu"
				"In22.Cu" "In23.Cu" "In24.Cu" "In25.Cu" "In26.Cu" "In27.Cu" "In28.Cu"
				"In29.Cu" "In30.Cu"
			)
			(uuid "b2c379a7-53d7-47dd-bea1-d215ef6fa224")
		)
		(embedded_fonts no)
	)
	(gr_arc
		(start 106.35 100)
		(mid 101.859872 98.140128)
		(end 100 93.65)
		(stroke
			(width 0.00254)
			(type solid)
		)
		(locked yes)
		(layer "Edge.Cuts")
		(uuid "04b1b363-67b7-427e-ac65-2c9b99dcf671")
	)
	(gr_line
		(start 186.36 87.3)
		(end 186.36 58.09)
		(stroke
			(width 0.00254)
			(type solid)
		)
		(locked yes)
		(layer "Edge.Cuts")
		(uuid "0620275b-d823-4b72-a4c5-39d59d411dac")
	)
	(gr_line
		(start 106.35 100)
		(end 173.66 100)
		(stroke
			(width 0.00254)
			(type solid)
		)
		(locked yes)
		(layer "Edge.Cuts")
		(uuid "1c860b8b-640e-4c8b-8cd7-f55851e6b1b0")
	)
	(gr_line
		(start 120.32 79.045)
		(end 100 79.045)
		(stroke
			(width 0.00254)
			(type solid)
		)
		(locked yes)
		(layer "Edge.Cuts")
		(uuid "1ee099c2-5c90-4f66-9dd1-0b41ae1c648b")
	)
	(gr_line
		(start 105.715 45.39)
		(end 105.715 61.265)
		(stroke
			(width 0.00254)
			(type solid)
		)
		(locked yes)
		(layer "Edge.Cuts")
		(uuid "2574aa0a-413d-471c-93b3-9e2230701dbf")
	)
	(gr_line
		(start 100 79.045)
		(end 100 93.65)
		(stroke
			(width 0.00254)
			(type solid)
		)
		(locked yes)
		(layer "Edge.Cuts")
		(uuid "27fc9171-3cd5-4ae5-9653-d3c07f466d18")
	)
	(gr_line
		(start 173.66 45.39)
		(end 105.715 45.39)
		(stroke
			(width 0.00254)
			(type solid)
		)
		(locked yes)
		(layer "Edge.Cuts")
		(uuid "318b9bd8-eade-49d9-8393-3cb849979453")
	)
	(gr_arc
		(start 186.36 87.3)
		(mid 182.640256 96.280256)
		(end 173.66 100)
		(stroke
			(width 0.00254)
			(type solid)
		)
		(locked yes)
		(layer "Edge.Cuts")
		(uuid "54174b58-8309-4bfc-8b33-2171926bfe17")
	)
	(gr_arc
		(start 173.66 45.39)
		(mid 182.640256 49.109744)
		(end 186.36 58.09)
		(stroke
			(width 0.00254)
			(type solid)
		)
		(locked yes)
		(layer "Edge.Cuts")
		(uuid "6f3cb430-a1d2-44ec-881c-d3db83d3cd15")
	)
	(gr_line
		(start 120.32 61.265)
		(end 120.32 79.045)
		(stroke
			(width 0.00254)
			(type solid)
		)
		(locked yes)
		(layer "Edge.Cuts")
		(uuid "b37a40e4-1d86-44b9-a0c7-c0e69e31719a")
	)
	(gr_line
		(start 105.715 61.265)
		(end 120.32 61.265)
		(stroke
			(width 0.00254)
			(type solid)
		)
		(locked yes)
		(layer "Edge.Cuts")
		(uuid "d8932619-7f14-44e4-95ea-c1f69e228d1a")
	)
	(gr_text "Note: due to to way pin numbers work on the BBB, the connectors\nare actually 2.54mm pin headers with the 3D models overridden."
		(at 101 103 0)
		(layer "Cmts.User")
		(uuid "b1b8f75b-4921-439d-93ea-af582d967cdd")
		(effects
			(font
				(size 1.5 1.5)
				(thickness 0.3)
			)
			(justify left)
		)
	)
	(embedded_fonts no)
)
